MASH TUN & MASH HIDRATOR
Max capacity 400KG. Sparge arm,
Auger connected to Grain hopper
Grist case mash hidrator joins under auger to mix HL.

UNDERBACK
Connected to Mash and controlled by sensors to variable speeds

KETTLE WITH INTERNAL GAS COIL
Max capacity 1800 litres, Connected to extraction unit

LANEMARK BURNER & EXTRACTOR
Converted to run on LPG, Ecconomical and fast up to boil. From mash run off to boil in under 30 minutes.

HLT 2000 LTR + WITH HEATING ELEMENT

2 x 10BBL DISH BOTTOMED FVs
Dished bottomed and jacketed. Valves controlled by compressor and wired back to the control panel.
CIP arms, Up stands at two heights, sample valves and bottom outlet for racking.

1 x CHILLER UNIT
I will have to check the spec on this. The chiller is oversized for two FVs. Will take both tanks full from 20Degrees down to 4/6 degrees overnight.

GRAIN HOPPER – AUGER/COIL and motor
Max fill of 400KG

PIPEWORK & HEAT EXCHANGE
All pipework within the building including heat exchange.
Transfer of 1600 from boil temp to 20 degrees in 30/40 minutes.
Hose fittings, reducers and valves.

CONTROL PANEL FOR 3 x FVs
Control panel control shows probe temps at, Mash, HLT, FV1, FV2, Kettle, Heat Exchange + space for FV3
Control panel will open and close cooling valves and control the Cooling temp on chiller.
Variable mash pump speed based on sensors from under back.

PUMPS
Cold Liquor Pump, Hot Liquor Pump, Hot Wort Pump, Mobile Pump. HLT circulation Pump.

Looking to sell all together. buyer collects (Brewing Services can help to dismantle and re-assemble at additional cost), Contact enquires@brewingservices.co.uk / 01904 233418 for further details.